利用缩水的方法可以将羧酸转变为各种羧酸的衍生物,如酰氯、酸酐、酯、酰胺和腈等,反过来通过水解反应各种羧酸衍生物也可以转变为羧酸,除酰氯和酸酐外,酯、 酰胺和腈的水解一般都可以在酸或碱的催化下进行。
羧酸衍生物水解的速度与羰基碳原子的正电性有关,一般来说正电性越大,水解速度越快。
酰氯的水解
把羧酸制成酰氯,再通过酰氯去进行各种反应是有机合成中常用的方法,较少有用酰氯来制备羧酸的例子,但在有些条件下利用酰氯来制羧酸也是较为有效的。例如芳环通过佛克反应与草酰氯反应得到相应的酰氯。一般来讲脂肪酰氯的水解是相当快的,不用加任何催化剂即可反应。但芳香酰氯的反应要相对慢了很多,有时为了促进其水解需要加入碱和酸。
酰氯的水解示例
Aluminum chloride (160 g, 1.2 mol) was added to a stirred solution of the 4-n-pentylbiphenyl (224 g, 1 mol) in methylene chloride (1000 mL) at approximately -20°C. Then Oxalyl chloride (96 mL) was added to the solution at a temperature below -10°C. After addition, the reaction temperature was allowed to rise to approximately 0°C. Stirring continued at approximately 0°C untill the evolution of hydrogen chloride was ceased. The resulting reaction mixture was poured into ice water forming two nonmiscible fluid layers. The organic layer was seperated from the aqueous layer, washed with water, and dried over anhydrous sodium sulfate. The solvent was removed by distillation to yield a crude 4-n-pentylbiphenyl-4’-carboxy chloride (213 g, 75%) which was used directly in the next step.
The 4-n-pentylbiphenyl-4’-carboxy chloride (142 g, 0.5 mol) was reacted with a hot, stirred solution of sodium hydroxide (60 g, 0.75 mol) in water (50 mL) and acetone (500 mL) for about three hours. The cold reaction mixture was then acidified with concentrated hydrochloric acid solution. The acid was filtered and washed with water untill the filtrate was neutralized. The product of the reaction was purified from ethanol to yield 4-n-pentylbiphenyl-4’-carboxylic acid (102.4 g, 80%).